Woodworking Motors

Motors are designed for woodworking equipment such as lathes, table saws, planers etc… Totally enclosed designs prevent motor problems caused by wood dust and shavings.

Table Saw Motor

Designed for extra high breakdown torque for maximum cutting power. Motor is supplied with an 8-foor cord and 115V plug and also includes an on/off toggle switch. Motor is pre-connected for CW rotation, facing lead-end. This is a direct replacement for Delta motor number 62-042.

Contractors’ Saw Motors

These totally enclosed fan cooled (TEFC) motors produce extra high breakdown torques for maximum cutting power. Motors are mounted using a special bracket, so that the motor pivots on rod for belt tensioning. Motor’s shafts are 1-3/4 inches long, ¾ inch diameter with a keyway. Motors include a 54-inch cord. Catalog numbers 120925 and 120997 replace Delta UNISAW® motor 83-621 (1.5HP); 120728 and 120998 replace Delta UNISAW® motor 83-651 (3HP)

Contractor’s Power Tool Motors

Open Drip Proof (ODP) double shaft motors for woodworking applications. They utilize an electronic starting switch and double sealed ball bearings to prevent failures caused by sawdust accumulation. Motors are designed for high torques and have reduced amp draw for more overall efficiency. Shaft extension, each end, with keyway and flat 90° apart for ease of mounting. Useable shaft, each end is 1.5 inches long by ½ inch diameter on 48 frame and S56 frame models and 1.875 long by 5/8 inches on 56 frame motor.