DC Integral Gearmotors

PZ Series DC Gearmotors

General Specifications:

These gearmotors are designed for continuous duty service over a 60:1 speed range. All have constant torque operation throughout this speed range when powered by a full-wave unfiltered SCR-type adjustable speed control having a typical form factor of 1.3 to 4. Low voltage gearmotors are designed for battery power or can be used with a low voltage controller with form factor up to 1.05.

Mechanical Specifications: Mechanical Specifications:

These gearmotors are designed for mounting at any angle, but shaft up with motor below should be avoided to prevent leakage of lubricant into the motor should the motor’s shaft seal fail. Gear-head damage may occur if gearmotor is stalled, especially in the ratios of 60:1 or higher. Overhung load capacities shown are at center of output shaft. Model PZ gearmotors have the same mounting dimensions as Bodine model D and Z gearmotors, Bison 100 gearmotors, and Baldor/Boehm PSS, plus many of the Dayton brand gearmotors.

P300 Series DC Gearmotors

General Specifications:

These gearmotors are designed for continuous duty service over a 60:1 speed range. All have constant torque operation throughout this speed range when powered by a full-wave unfiltered SCR-type adjustable speed control having a typical form factor of 1.3 to 4. Low voltage gearmotors are designed for battery power or can be used with a low voltage controller with form factor up to 1.05.

Mechanical Specifications: Application Notes:

These gearmotors are designed for mounting at any angle, but shaft up with motor below should be avoided to prevent leakage of lubricant into the motor should the motor’s shaft seal fail. Gear-head damage may occur if gearmotor is stalled, especially in the ratios of 60:1 or higher. Overhung load capacities shown are at center of output shaft. Model 300 gearmotors have the same mounting dimensions as Bison’s 300 gearmotors, and many of the Dayton brand gearmotors.

PE350 Series DC Gearmotors

General Specifications:

These gearmotors are designed for continuous duty service over a 60:1 speed range. All have constant torque operation throughout this speed range when powered by a full-wave unfiltered SCR-type adjustable speed control having a typical form factor of 1.3 to 4. Low voltage gearmotors are designed for battery power or can be used with a low voltage controller with form factor up to 1.05.

Mechanical Specifications: Application Notes:

Sub-fractional AC Gearmotors that are totally enclosed for continuous duty, general-purpose applications. These gearmotors are designed for mounting at any angle, but shaft-up with motor below gearhead is not recommended. Gears and bearings are splash lubricated with permanent, heavy-duty gear oil. All gearing is designed and rated to AGMA Class 9 standards to withstand momentary shock overload of 200%. Model PE350 gearmotors have the same mounting dimensions as Bodine’s “E” box and Baldor gearmotors.

P1100 Series DC Gearmotors

General Specifications:

Our line of P1100, DC Gearmotors utilize Fractional horsepower, permanent magnet, DC motors. They are totally enclosed